91天堂,偶日韩99.com,国产精品色老大在线播放,99爱guochanjidi

山東創圖建筑裝飾工程有限公司 山東創圖建筑裝飾工程有限公司
加工技術熱線:13165128506
  • 您當前位置: 首頁>>新聞動態>>常見問題抗倍特掛墻板的安裝要注意什么?

    常見問題

    抗倍特掛墻板的安裝要注意什么?

    來源:http://qdlaojing.cn/ 日期:2023-04-15 發布人:admin
    (1)測量墻面。這是一個安裝護板墻的時間步驟。只有通過精確測量墻面,才能計算出需要多少單片或單片墻板。首先測量墻面的長度和寬度,根據墻板的尺寸計算出墻板所需的整數塊。多余的空間可以通過拼接墻板來完成,拼接應分布在末端。
    (1) Measure the wall surface. This is the first step in installing a fender wall. Only by accurately measuring the walls can we calculate how many single or single wall panels are needed. Firstly, measure the length and width of the wall, and calculate the required integer blocks for the wall panel based on its size. Excess space can be achieved by splicing wall panels, which should be distributed at the ends.
    (2)安裝踢腳線。踢腳線可以進行很好的保護環境墻面,所以我們這是抗倍特掛墻板安裝應用程序中非常重要基本的一步。
    (2) Install baseboard. The baseboard can well protect the environment and wall surface, so this is a very important and basic step in the installation application of Anti Brilliant wall panels.
    一般的來說,要先在墻面上鉆孔,用膨脹螺絲或鋼釘將踢腳線掛鉤固定在墻上。然后在鉤子上掛上一條一端為45°角的踢腳線。
    富美家抗倍特
    Generally speaking, first drill holes on the wall and fix the baseboard hook on the wall with expansion screws or steel nails. Then hang a baseboard with an angle of 45 ° at one end on the hook.
    (3)安裝掛墻板。
    (3) Install wall panels.
    做好以上述兩個重要步驟以后需要我們生活就要不斷進行掛墻板安裝了。首先,將抗倍特掛墻板從左向右慢慢插入做工精良的護壁線,然后在護壁線以上約1.5厘米的位置(板寬在中間)安裝膨脹螺釘或鋼釘。需要提醒的是,安裝墻板時釘子不能露出。
    After completing the two important steps mentioned above, we need to continuously install wall panels in our daily lives. Firstly, slowly insert the anti magnification wall panel from left to right into the well crafted wall protection line, and then install expansion screws or steel nails approximately 1.5 centimeters above the wall protection line (with the panel width in the middle). It should be noted that the nails cannot be exposed when installing the wall panel.
    (4)安裝頂角線。頂角線又稱陰影角線,是指墻壁與天花板之間的那條線連接。通常處理這種頂角線的方法是在兩邊涂上特殊的膠水,然后貼在頂角,拉開幾分鐘,然后貼緊。
    (4) Install the top corner line. The top corner line, also known as the shadow corner line, refers to the line connecting the wall and ceiling. The usual method of handling this type of top corner line is to apply special glue on both sides, then apply it to the top corner, open it for a few minutes, and then apply it tightly.
    本文由富美家抗倍特整理發布,您是不是對這些內容有所了解了呢?更多的內容請點擊:http://qdlaojing.cn我們會有更多精彩內容等你查看。
    This article is organized and published by Fumeijia Kangbeite. Do you have any understanding of these contents? For more information, please click on: http://qdlaojing.cn We will have more exciting content waiting for you to check out.
    聯系我們

    產品銷售熱線:13165128506

    技術方案咨詢:18560211715

    倉庫地址:山東省濟南市天橋區金鑫產業園303倉庫

    九江工廠:九江市江東大道3號

    臺灣新竹工廠:臺灣新竹

    泰國曼谷工廠:泰國曼谷

    關注我們
    山東創圖建筑裝飾工程有限公司 備案號:魯ICP備14019259號-2 網站地圖 XML TXT 魯公網安備37010502002020號

    截屏,微信識別二維碼

    微信號:13165128506